0086 18755593108

Q35Y Series Hydraulic Iron worker

release time:2016-04-06

 


  It adopts hydraulic driving system and they are the latest iron workers in our country, various metal plate, square bar, Round bar, angle, channel and joist can be cut, punched and notched on the machine. It is also equipped with a stop device for cutting. 

  Products Station


Automatic stop gauge can be adjusted in accordance with the shearing length, thus, it can control efficient shearing length automatically.

Punching Station
There are all kinds of punching dies to be exchanged, thus, it can make all kinds of holes on angle steel, profiled steel and plates.


Notching Station:
Special design can excellently cut right-angle, bevel and notch on the angle steel, profile steel and plates. There is a large visible window with scale and stop gauge.


45°shearing of small angle steel can make frames welding excellently.

Shearing steel plates
There are several visible holes in adjustable holder, which can ensure accurate shearing of steel plates and 45°angle.Working table with scales and adjustable plates can do angle shearing.


Specially contoured anti-distortion blade for quality cuts. Lower blade has four usable edges. Allen head set screws allow for easy gapping of the machine. No shimming is required.

Punching position
There is a large visible window shelf on the top of the punching table, after turning on it, above and below dies can be changed quickly.



45°shearing of small angle steel can make frames welding excellently

Round and Square bar shear has multiple holes for a variety of sizes. Adjustable hold down for clean square cutting. Optional Channel and beam shears available.

Large heavy duty knobs Precise square bar cutting


Large strong guarding for maximum safety

Mitering with large standard squaring arm


FIVE SETS OF TOOLS OF STANDARD ACCESSORIES

  1.  ONE SET OF PUNCHING BLADE
  2.  ONE SET OF FLAT BAR CUTTING BLADE
  3. ONE SET OF ANGLE BLADE
  4. ONE SET OF PROFILE CUTTING BLADE
  5. ONE SET OF NOTCHING BLADE

  Hydraulic System Components: The hydraulic system components are imported components. The main hydraulic valve used Yuken Japan international brand. Hydraulic gear pump is the world famous Athos. In order to prevent the use of process machinery oil leaking, we have adopted the best seal. Main electrical components are used in French Schneider Electric brand. About limit switch ,we use Omron proximity switches, it can safely move more than 100,000. 

  Both side of profile cutting moving blade guide by friction plate. In order to make the machine looks beautiful, we use imported advanced paint, 2-3 years to ensure the machine does not fade and cleaning easily.

Inquiry Form
返回顶部